KTR Systems GmbH | Carl-Zeiss-Straße 25 | 48432 Rheine  | T +49-5971798-0 | F +49-5971798-698

Coupling configurator GEARex®

Dear customer,

your previous input data from the coupling configurator are carried over.
Please refine your input for the product GEARex®.

1. Application


2. Products

GEARex® FA/FB/FAB
GEARex® DA/DB/DAB

3. Technical Data

Base data

kW   ⇔   {{layoutparameter.inputTKN}} Nm Nm
Speed: min-1
Operating factor / Application SB:  ({{currentAppDesc}})
Comment:

Driving

Bore type:
Ø bore driving d1:
mm   (max.: )
Dowel screw:
Finish bore according to ISO fit H7, feather keyway according to DIN 6885 sheet 1 - JS9
Splinenorm:
Profile code:
Code:
Code: {{ inchDataDriving.ktrCode }}
Ø d: {{ inchDataDriving.diameterInch }}″ (⇔ {{ inchDataDriving.diameterMM }} mm)
b: {{ inchDataDriving.keyWidthInch }} ″ (⇔ {{ inchDataDriving.keyWidthMM }} mm)
t2: {{ inchDataDriving.keyDepthMM }} mm


Finish bore and feather keyway according to ANSI/AGMA 9002-C14

Driven

Bore type:
Ø bore driven d2:
mm   (max.: )
Dowel screw driven:
Finish bore according to ISO fit H7, feather keyway according to DIN 6885 sheet 1 - JS9
Spline norm:
Profile code:
Code:
Code: {{ inchDataDriven.ktrCode }}
Ø d: {{ inchDataDriven.diameterInch }} ″
b: {{ inchDataDriven.keyWidthInch }} ″ (⇔ {{ inchDataDriven.keyWidthMM }} mm)
t2: {{ inchDataDriven.keyDepthMM }} mm


Finish bore and feather keyway according to ANSI/AGMA 9002-C14
Please correct wrong or missing input data in the yellow fields.
   

Result {{numResults}}
{{r.name}}
TKN nmax Weight Mass moment of inertia Material
Kupplung {{ r.sleeve.tkn }} Nm {{ r.sleeve.maxN }} min-1 ca. {{ r.weight }} kg {{ r.momentOfInertia }} kgm2 {{ r.material }}
Space required to align the coupling or replace the sealing ring: {{ r.massF }} mm
Count (z) Thread (M) Tightening torque (TA)
Dowel screw (10.9) {{ r.techDriving.dowelScrew_z }} {{ r.techDriving.dowelScrew_M }} {{ r.techDriving.dowelScrew_TA }} Nm
Weight hub Dowel screw
Driving side ca. {{ r.techDriving.weight.toLocaleString() }} kg {{ r.setscrewDriving == true ? 'Ja' : 'Nein' }}
Driven side ca. {{ r.techDriven.weight.toLocaleString() }} kg {{ r.setscrewDriven == true ? 'Ja' : 'Nein' }}
ATTENTION: the Shaft-hub-connection must be checked by the customer!
{{version}}
Information
Dear customer,

unfortunately we were unable to find a matching coupling.

Please contact our KTR specialists.

You can use the button to create a Mail prefilled with all relevant information.

Or you can just give our support a call:

Engineering GEARex®
Tel. +49 (5971) 798-487
Hints regarding the coupling selection with operating factors
The operating factors used are based on experiences estimating the operating behaviour of drive and driven machine. In case of a periodic running of the machines or when starting or braking larger masses a special selection acc. to DIN 740 or a torsional vibration calculation must be made by the manufacturer of the coupling.

This information is supplied without warranty.
We reserve the right for modifications of dimensions and designs.
Kontakt
Sales GEARex®
T +49 (5971) 798-0
F +49 (5971) 798-698
E vertrieb@ktr.com

Engineering GEARex®
T +49 (5971) 798-487
F +49 (5971) 798-698
E info-gearex@ktr.com
No products selected.